Installation Process Of Blackout Curtain Cloth

1. The accuracy of line drawing will be related to the success or failure of curtain installation. At the beginning, we need to measure the fixed hole spacing and the size of the required installation track.

2. Install curtain rails

(1) Curtain rails can be divided into single, double or 3-track. When the window width is greater than 1200, the curtain rail should be disconnected, and the bends at the disconnection should be staggered. The bends should be gentle curves, and the overlap length should not be less than 200. Ming curtain boxes generally install the track first. Heavy curtain rails should be installed with machine screws; dark curtain boxes should be installed with rails behind them. The small corners of heavy curtain tracks should be closely spaced, and the size of wood screws should be no less than 30.

(2) Install the lifting clips, rotate the clips 90 degrees to connect with the track, and use self-tapping screws to install the lifting clips on the top plate. If it is a concrete structure, extension screws need to be added.

3. Install curtain rods

(1) Calibrate the continuous fixing piece, install the rod or wire, and pull it on the fixing piece. Make sure the elevations between the flat and central areas are consistent.

(2) When installing standard curtain tracks (double tracks), the base width should generally be above 15CM. Single tracks can be reduced according to appropriate circumstances.

4. Adjust the position

For floor-standing curtains or curtains that hang over the countertop, the track should be installed to allow for the width of the window sill to prevent the curtains from being blocked when drooping and looking unsightly.